Fax Job View/Cancel

If you no longer require a stored fax job, you can cancel and remove it from your MFP’s memory.

1.Press the FAX JOB VIEW/CANCEL button on the control panel to prompt the Review commands screen.

2.Press the View reserved T button to display the list of fax jobs.

3.Select the fax job you wish to delete.

4.At the prompt, press Yes to confirm the deletion or press No to cancel the operation and return to the list of fax jobs.

Fax Job Reports and Listings

Refer to “Reports and Listings” on page 114.

Fax Receiving

Your MFP is set to receive faxes automatically, if you wish to change this to manual receive refer to “Auto Rx” on page 82 for details.

Your MFP is set to fax ready reception mode, if you wish to change this refer to “Reception Mode” on page 70.

NOTE

•If the MFP is actively sending or receiving a fax, then any incoming faxes will be rejected.

•Fax printing will only occur when the selected tray (or one of the trays when Tray Selection is set to “Auto”) is defined as containing PLAIN media type. Refer to “Paper Setup” on page 32.

Operation > 92