FEATURE

OPTION

 

 

DESCRIPTION

 

 

 

 

 

Fax Setup

Default

MCF Report

OFF, ON

If enabled, the result of the

(cont.)

Settings

 

 

transmission will be printed out

 

(cont/)

 

 

each time.

 

 

 

 

 

 

 

Memory Tx

OFF, ON

This sets the transmission mode to

 

 

 

 

memory Tx (ON) or real-time Tx

 

 

 

 

(OFF).

 

 

 

 

 

 

F-Code Box

Register/Edit

Secure Box

Secure Box: received data cannot

 

 

 

 

be printed without entering ID

 

 

 

 

code (for secret documents).

 

 

 

 

Use the numeric keypad to enter

 

 

 

 

the sub-address and ID code (note

 

 

 

 

enter a four-digit ID code).

 

 

 

 

You can also enter a Box Name,

 

 

 

 

Password and specify the hold

 

 

 

 

time for your secure box.

 

 

 

 

 

 

 

 

Bulletin Box

Bulletin Box: Enable to transmit/

 

 

 

 

receive documents to/from

 

 

 

 

Bulletin.

 

 

 

 

You can also enter a Box Name,

 

 

 

 

Password, enable Rx Protect, Auto

 

 

 

 

Print, OverWrite, Erase Tx Doc and

 

 

 

 

specify a four-digit ID code.

 

 

 

 

 

 

 

Delete

 

Select the box number to delete

 

 

 

 

and press Yes to confirm deletion.

 

 

 

 

If you are deleting a secure box

 

 

 

 

entry, enter the four-digit ID code

 

 

 

 

and press Yes to confirm deletion.

 

 

 

 

 

 

Security

ID check Tx

OFF, ON

Check and match the last four

 

function

 

 

digits of the destination fax

 

 

 

 

numbers with those registered in

 

 

 

 

the target. If ON, the unit will send

 

 

 

 

only when they match.

 

 

 

 

 

 

 

Check broadcast

OFF, ON

Fax number confirmation screen

 

 

dest.

 

displays before sending the fax.

 

 

 

 

 

 

 

Confirm Dial

OFF, ON

When ON, you will be asked to re-

 

 

 

 

enter the destination fax number.

 

 

 

 

The fax will only be sent when the

 

 

 

 

two numbers match.

 

 

 

 

 

 

Auto Print

Setting

OFF, ON

Enable/disable auto print journal

 

Journal

 

 

report.

 

Report

 

 

 

 

Print time

OFF, ON

When ON, enter the time using

 

 

 

 

 

 

the arrow keys or keypad.

 

 

 

 

The journal report will be printed

 

 

 

 

at the specified time every day.

 

 

 

 

 

 

Other

Redial Tries

00~02~14 Times

Set the number of redial attempts.

 

Settings

 

 

 

 

Redial Interval

0~1~5 Min

Set the time between redial

 

 

 

 

 

 

attempts.

 

 

 

 

 

Configuring Your Machine > 41