FEATURE

OPTION

 

 

 

DESCRIPTION

 

 

 

 

 

 

Print Setup

Print Menu

Printer Adjust

BG Setting:

 

To correct variations in print

(cont.)

(cont.)

(cont.)

-3, -2, -1, 0, +1, +2,

results caused by temperature/

 

 

 

+3

 

humidity conditions and difference

 

 

 

 

 

in print density/frequency.

 

 

 

 

 

Change the setting when

 

 

 

 

 

background is dark.

 

 

 

 

 

 

 

 

Print Position

Front X Adjust:

 

X adjust: Adjusts the position of

 

 

Adjust

-2.00~0~+2.00 mm

the whole printing image

 

 

 

Front Y Adjust:

 

perpendicular to the direction of

 

 

 

-2.00~0~+2.00

mm

paper movement (i.e.

 

 

 

Back X Adjust:

 

horizontally).

 

 

 

 

Y adjust: Adjusts the position of

 

 

 

-2.00~0~+2.00

mm

 

 

 

Back Y Adjust:

 

the whole printing image parallel

 

 

 

 

to the direction of paper

 

 

 

-2.00~0~+2.00 mm

 

 

 

movement (i.e. vertically).

 

 

 

 

 

 

 

 

 

 

 

 

 

Drum Cleaning

OFF, ON

 

Set to produce idling of a drum

 

 

 

 

 

before printing in order to reduce

 

 

 

 

 

horizontal white lines. This

 

 

 

 

 

shortens image drum life.

 

 

 

 

 

 

 

 

Hex Dump

OFF, ON

 

Prints out the data received from

 

 

 

 

 

the host PC in hexidecimal code.

 

 

 

 

 

 

 

Color Menu

Density Control

Manual, Auto

 

If set to Auto, image density will

 

 

 

 

 

be automatically adjusted at

 

 

 

 

 

power on, when a new image

 

 

 

 

 

drum or toner cartridge is

 

 

 

 

 

installed, and at intervals of 100,

 

 

 

 

 

300 and 500 drum counts. If a 500

 

 

 

 

 

drum count interval occurs during

 

 

 

 

 

a print job it will occur at the end

 

 

 

 

 

of that job, and will take up to 55

 

 

 

 

 

seconds. If set to manual, this

 

 

 

 

 

adjustment will only be performed

 

 

 

 

 

when initiated by the next menu

 

 

 

 

 

item.

 

 

 

 

 

 

 

 

Adjust Density

Execute

 

Press Yes to execute or No to

 

 

 

 

 

cancel.

 

 

 

 

 

Selecting this will perform the auto

 

 

 

 

 

density set up immediately.

 

 

 

 

 

 

 

 

Color Tuning/

Execute

 

Press Yes to execute or No to

 

 

Print Pattern

 

 

cancel.

 

 

 

 

 

Selecting this item prints the color

 

 

 

 

 

tuning pattern to help you adjust

 

 

 

 

 

the color balance.

 

 

 

 

 

 

Configuring Your Machine > 49