FRONT PANEL
ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ITALIANO PORTUGUÊS SVENSKA
1POWER: Switch off to disconnect the S170i from all AC power and exit the Standby mode. Switching POWER on both reconnects the AC and actively
2STANDBY: Illuminates when the S170i is in the Standby or On mode (dark when the S170i is
3AUDIO: Press to select audio inputs sequentially using the VOLUME (SETUP) knob (see “Front Panel Operations,” below).
4VIDEO: Press to select video inputs sequentially using the VOLUME (SETUP) knob (see “Front Panel Operations,” below).
5TAPE MONITOR: Press to engage the Tape Monitor loop. The signal present at the
6MULTISOURCE: Press to select the signal output by the
7SPEAKERS: Press to access the <Speaker setup> menu on the front panel readout, and to select parameters using the using the VOLUME (SETUP) knob and subsequent presses of the SPEAKERS key (see “Configuring Your S170i,” and “Front Panel Operations,” below).
8DELAY: Press to access the <Delay setup> menu on the
9LEVELS : Press to access the <Levels setup> menu on the
10BRIGHTNESS: Press to dim the S170i’s
11TONE: Press to adjust treble using the VOLUME (SETUP) knob; press again to adjust bass, and a third time to exit
12MODE: Press to select listening modes sequentially using the VOLUME (SETUP) knob (see “Setting Listening Modes,” and “Front Panel Operations,” below).
13VOLUME (SETUP): Turn clockwise to increase the
The VOLUME (SETUP) knob is also used to increment/decrement individual channel levels and other adjustable parameters.
14VFL DISPLAY: The Vacuum Fluorescent Display provides visual information on all of the S170i's important modes, settings, and functions for both MAIN and second ZONE locations.
10