NAD S170iAV Ears, Analog Bypass, Ch. PCM Ch. analog Multi-ch. DD/DTS, Selecting Listening Modes

USING THE S170i

EARS

Stereo recordings (and surround-encoded stereo recordings), whether in PCM/digital or analog form, are reproduced with proprietary NAD surround processing with output to left, center-, and right-front channels and both surround-channel speakers. EARS extracts the natural ambience present in nearly all well-produced stereo recordings. It does not synthesize any ambience or other sonic elements and thus remains far truer to the sound of the original musical performance than most other music-surround options.

Select EARS for listening to stereo music recordings and broadcasts. EARS produces a subtle but highly natural and believable ambience from nearly all “natural-acoustic” stereo recordings; typically, these include classical, jazz, and folk genres as well as numerous examples from others. It’s virtues include a realistic, stable “front-stage” sonic imaging and spacious but unexaggerated ambient “virtual acoustics” that remain faithful to the original recording.

NOTE

When listening to FM broadcasts, “multi-path distortion” may be more clearly revealed by the EARS circuit. This can be used to advantage in optimally orienting an FM antenna for a given FM station.

EARS cannot be applied to multichannel digital recordings (Dolby Digital/DTS); these recordings carry their own surround and ambience in their multichannel nature. However, EARS may be applied to these recordings when they are played back via the analog stereo outputs of a DVD or other player, or when the DVD or other recording’s soundtrack selection is set to “stereo/PCM” rather than “5.1” or equivalent.

ANALOG BYPASS

Stereo or monaural recordings from any S170i source’s analog input jacks are routed directly to the left- right-front outputs with no processing whatsoever.

Use Analog Bypass to reproduce minimal-signal-path “audiophile” conditions for critical listening of two- channel (or monaural) sources.

No bass management is performed in Analog Bypass mode, so signals are reproduced by the left- and right-front channels “full-range,” regardless of the settings entered on the S170i’s Speaker setup page.

The table below indicates which listening modes are available with the three possible types of signal sources: digital-input 2-channel (whether the actual signal is monaural, stereo or surround-encoded); analog-input 2-channel (mono, stereo or surround-encoded), or digital-multichannel (Dolby Digital or DTS). Where a listening mode is not available to a given signal source, it will not appear in the <Mode> selection rotation.

2-ch. PCM	2-ch. analog	Multi-ch. (DD/DTS)
Mono	Mono	Mono
Stereo	Stereo	Stereo
Pro Logic	Dolby Pro Logic	Direct
EARS	EARS	Surround 6.1*
—-	Analog Bypass	—-
		*If setup with “Back” speaker(s)

SELECTING LISTENING MODES

NOTE THAT:

•You must re-key [Mode ] if a few seconds pass since your last use of the [Cursor ] to change listening modes

•Neither changing the selected input, cycling the S170i through Standby or powering down, nor engaging mute will change the selected listening mode.

•Changing the type of signal will change the listening mode if the new signal is a digital-multichannel recording, or is incompatible with the selected mode. For example: After listening to a CD played on a DVD/CD player via the EARS listening mode, you remove the CD and replace with a 5.1-channel multichannel DTS CD recording. The S170i will automatically engage DTS/5.1 playback.

SVENSKA PORTUGUÊS ITALIANO ESPAÑOL DEUTSCH FRANÇAIS ENGLISH

25