NAD S170iAV owner manual Rear Panel

REAR PANEL

ATTENTION!

Please make all connections to your S170i preamplifier with the unit powered off or unplugged. (It is equally wise to power-down or unplug all associated components while making or breaking any signal or AC power connections.)

1COMPOSITE VIDEO IN 1-6: Connect Video Inputs 1-6 to composite video from source components (see “Source Setup,” below).

2COMPOSITE VIDEO OUT 4-6 OUT; MON OUT: Connect to composite-videorecord-inputs of recording components; connect MON OUT to the composite-video input of the video monitor/TV.

3S VID1 IN - S VID6 IN: Connect Video Inputs 1-6 to S-Video from source components (see “Source Setup,” below).

4S VID4 OUT - SVID6 OUT; MON OUT: Connect to S-Video record inputs of recording components; connect MON OUT to the S-Video input of the video monitor/TV.

5COMPONENT VIDEO IN (upper), OUT (lower): Connect inputs to component-video signal or wide-band component video from a source component such as a DVD player or HDTV tuner; connect outputs to the component-video inputs of the video monitor/TV. Be sure to observe consistency in connecting the Y, CB, and CR jacks to the corresponding sources/inputs (see “Source Setup,” below).

6NAD LINK IN/OUT: Connect to the corresponding NAD Link jacks (input to output and vice versa) of compatible NAD components (see “NAD Link,” below).

7DIGITAL 1-3; DIGITAL IN; DIGITAL OUT: Connect DIGITAL 1-3 to coaxial S/PDIF-format digital sources such as CD or DVD players; connect DIGITAL IN to a high-qualityS/PDIF-format source via BNC cabling; connect DIGITAL OUT to the coaxial S/PDIF digital input of a recording component such as a CD recorder, DAT deck, or computer soundcard (see “Source Setup,” below).

8OPTICAL DIGITAL IN 1-2; DIGITAL IN; OPTICAL DIGITAL OUT: Connect OPTICAL DIGITAL 1-2 to optical S/PDIF-format digital sources such as CD or DVD players; connect OPTICAL DIGITAL OUT to the optical S/PDIF digital input of a recording component such as a CD recorder, DAT deck, or computer soundcard.

9RS-232: Connect to the RS-232 serial port of a home-automation system or personal computer (see “System Integration,” below).

10VIDEO 1-6 Analog Audio Inputs: Connect to stereo analog outputs of audio-video sources (see “Source Setup,” below).

11VIDEO ANALOG REC OUT 4-6: Connect to stereo analog inputs of recording audio-video components such as videocassette recorders.

12CD, AUX, TUNER Inputs: Connect to stereo analog outputs of audio components.

13TAPE MONITOR IN/OUT: Connect OUT to the stereo analog inputs, and IN to the outputs of an audio recording components such as a cassette deck or CD recorder, or of an analog audio processor such as a stereo equalizer.

14MULTISOURCE OUT: Connect to the inputs of the stereo amplifier (integrated amp, receiver) that will power the remote-zone’s loudspeakers (see “Listening in a Remote Zone,” below).

15PREAMP ANALOG 7.1 OUTPUTS: Connect L, R, and CENTER to the channel inputs of the power amplifier(s) driving the front, channels; connect LS and RS to the power amplifier driving the surround speakers and LEFT B and RIGHT B to that driving the surround-back speakers (if any); connect sub to the line input of a powered subwoofer or to the amplifier driving a passive sub (if any).

16EXTERNAL 5.1 INPUTS: Connect to the corresponding analog audio outputs of a multichannel source component such as a DVD- Audio or multichannel SACD player. There is no bass-management or other processing available to these inputs; see “Selecting Sources,” below.

1712V TRIGGERS: Connect to the 12-volt trigger inputs of compatible components such as power amplifiers and projector lifts; see “Trigger setup,” below.

18AC power inlet: Connect to the supplied IEC-standard removable AC power cord or a compatible cord.

SVENSKA PORTUGUÊS ITALIANO ESPAÑOL DEUTSCH FRANÇAIS ENGLISH

11