Page 92 NDA-30122 Revision 1
STATION GROUPS Attendant Console Statistics Operations Manual
Station Groups (Cont.)
Modifying a Station Group (Cont.)
Step 7: When modifications to the station group are complete, use the Tab key
to select the Ok option at the bottom of the window and press Enter to
save the changes. The station Groups screen will again be displayed.
- If more than one s tation group was marked to modify (Step 2), a new
Modify a Station Group window will now be displayed showing the nex t
station group selected to modify. Repeat Steps 4-7.
Note: At anytime BEFORE saving the changes (Step 7), the original settings for the se-
lected station group can be restored. Using the Tab key, select the Clear option at
the bottom of the screen and press Enter. The prior settings for the station group
will be displayed on the screen.
Step 8: When the last Station Group has been modified, the Modify a Station
Group window pops down and the display returns to the Station Groups
screen (Figure 8-2).