Page 54 NDA-30122 Revision 1
AUTOMATED REPORT GENERATION Attendant Console Statistics Operations Manual
Generating Automated Reports (Cont.)
Modify an Automated Report This procedure will modify an existing automated report schedule and parameters.
Follow the steps to modify a report schedule:
Step 1: From the Console Stats Main Menu (Figure 5-1), select the Automated
Report Generation option and press Enter. The Automated Report
Generation screen (Figure 5-2) will be displayed
- The Automated Report Generation screen shows a listing of all currently
scheduled reports by scheduled date/time, report type , and report tit le (re-
ports scheduled by the Set function, see Set a Report Schedule).
Step 2: At the Automated Report Generation screen, use the UP and DOWN
arrow keys to select the automated report to modify and press Enter.
Note: More than one automated report can be selected. Highlight each desired report
to modify and press Enter. Continue this to select any additional reports to mod-
ify.
Step 3: With the automated report(s) selected, use the Ta b key to select the
Modify option at the bottom of the screen and press Enter. The Modify
an Automated Report window (Figure 5-5) will be displayed. (The
Report Title field will verify the report selected in Step 2.)
Figure 5-5 Modify An Automated Report Window
Step 4: If needed, modify the Event Type field selecting between Hourly,
Daily, Weekly, or Month/Date using the UP and DOWN arrow keys
and press Enter.
Step 5: If needed, modify the Time field by entering a new time value and press
Enter.