NEC NDA-30122 Deleting a Station Group (Cont.)

Page 94 NDA-30122 Revision 1
STATION GROUPS Attendant Console Statistics Operations Manual
Station Groups (Cont.)
Deleting a Station
Group (Cont.) Step 4: To delete the displayed station group, use the Tab key to select the Ok
option at the bottom of the screen and press Enter. The displayed station
group will be deleted.
Note: To no t delete (keep) the displayed station group, use the Tab key to select the Next
option at the bottom of the screen and press Enter. The next station group marked
for deletion will be displayed.
- If more than one st ation group was marked to delete (Step 2), a new De-
lete a station Group window will now be displayed for the next station
group selected to delete. Repeat as necessary for all selected station
groups to delete.
- As an option, if multiple station groups have been selected for
deletion-- use the Tab key to select the Ok To All option at the bottom of
the window and press Enter. A window will pop-up to confir m or cancel
the delete. If confirmed, all station groups selected (Step 2) will be delet-
ed. If canceled, no station groups will be deleted.
CAUTION
Be sure the selected station groups are really to be deleted.
Double-check the selections, their is no recovery from this
station groups delete.
Step 5: When the last Station Group has been deleted, the Delete a Station Group
window pops down and the display returns to the Station Groups screen
(Figure 8-2).