NDA-30122 Revision 1 Page 17
Attendant Console Statistics Operations Manual INSTALLATION & CONFIGURATION
Primary Configuration Parameters
From the APM Configuration Entry screen, configure each component as follows.
All parameters marked with asterisks (*) should be entered exactly as shown. The
rest of the entries in the table below are just e xamples.
Parameter Definition
Application Name The name to be displayed in the APM menus. This name
is displayed as it is entered here — i.e., cap ital letters,
lowercase, etc.
Executable Filename* The path name of the executable file.
Group* The group that the component belongs to. Make no entry.
Response Mode* The action that the APM is to take with the component
should a member of the group terminate.
Initialization Batch Whether (Yes or No) the component is to be initialized
automatically when the OAI system is initialized.
Termination Mode* How the APM is to notify the component to terminate.
Standard Output Where any output is sent.
Number of Restarts How many times the AP M may restart the component
after it terminates in error.
Queue Key The interprocess communication key by which the
component communicates with other processes.
This completes the configuration of Console Stats into the APM.
Proceed to the next page to review database support for Console Stats...
Paramet er StatPatroller
Values StatLogger
Value s
Application Name StatPatroller StatLogger
Executable Filename* /oai/app/stats/bin/patroller /oai/app/stats/bin/logger
Group* STATS STATS
Response Mode* I(gnore) I(gnore)
Initialization Batch N(o) N(o)
Termination Mode* T(erminate) M(essage)
Standard Output /dev/null /dev/null
Number of Restarts 0 0
Queue Key 112