Page 78 NDA-30122 Revision 1
ROUTE GROUPS Attendant Console Statistics Operations Manual
Route Groups (Cont.)
Finding a Route Group (Cont.) Step 4: If finding a route group by route number, at the Route field, enter the
number of the route group to be found and press Enter.
- If no other search values will be entered (i.e. First Trunk number), use the
Tab key to select the Ok option and press Enter. Now continue to Step 6.
Step 5: If finding a route group by first trunk number, at the First Trunk field,
enter the number of the first trunk number in the group to be found and
press Enter. Use the Tab key to select the Ok option and press Enter.
Now continue to Step 6.
Step 6: When all search values have been entered for an y one or any combination
of the three parameters, and the Ok option has been selected, a search
will now begin for the specified group.
- If a ma tch is found, the Find a Route Group window is popped down.The
Route Groups screen now shows the found route group highlighted on
the screen.
- If more than one match is found, each time the Find option is selected
the next match will be highlighted.
- If a match is not found, the Find a Route Group window remains visible
and an error message is displayed near the bottom of the screen.
Step 7: To begin a new search, use the Tab key to select the Clear option and
press Enter. repeat Steps 3-6 as needed.
Step 8: If finished with the Find a Route Group function, use the Tab key to
select the Exit option at the bottom of the window and press Enter to
return to the Route Groups screen (Figure 7-2).