NEC NDA-30122 Modifying a Route Group

NDA-30122 Revision 1 Page 79
Attendant Console Statistics Operations Manual ROUTE GROUPS
Route Groups (Cont.)
Modifying a Route
Group This procedure will modify an existing route group. Follow the steps to modify a
route group:
Step 1: From the Console Stats Main Menu (Figure 7-1), select the Route
Groups option and press Enter. The Route Groups screen (Figure 7-2)
will be displayed
Step 2: At the Route Groups screen, use the UP and DOWN arrow keys to
highlight to select the route group to modify.
- More than one route group can be selected. Highlight each desired route
group to modify and press Enter. Continue this to select any additional
route groups to modify.
Step 3: With the route group(s) selected, use the Tab key to select the Modify
option at the bottom of the screen and press Enter. The Modify a Rout e
Group window (Figure 7-5) will be displayed.
Figure 7-5 Modify A Route Group Window
Step 4: If needed, modify the Name for the route group and press Enter.
Step 5: If needed, modify the Route Number of the route group and press
Enter.
Step 6: If needed, modify the First Trunk assigned to this route group and press
Enter.
Step 7: If needed, modify the Last Trunk assigned to this route group and pre ss
Enter.