NEC NDA-30122 Modifying a Route Group (Cont.)

Page 80 NDA-30122 Revision 1
ROUTE GROUPS Attendant Console Statistics Operations Manual
Route Groups (Cont.)
Modifying a Route
Group (Cont.) Step 8: When modifications to the route group are complete, use the Tab key to
select the Ok option at the bottom of the window and press Enter to sav e
the changes. The Route Groups screen will again be displayed.
- If more than one route group was marked to modify (Step 2), a new Mod-
ify a Route Group window will now be displayed sho wing the n ext route
group selected to modify. Repeat Steps 4-8.
Note: At anytime BEFORE saving the changes (Step 8), the original settings for the se-
lected route group can be restored. Using the Tab key, select the Clear option at
the bottom of the screen and press Enter. The prior settings for the route group
will be displayed on the screen.
Step 9: When the last Route Group has been modified, the Modify a Route
Group window pops down and the display returns to the Route Groups
screen (Figure 7-2).