Page 100 NDA-30122 Revision 1
ADMINISTRATION MENU Attendant Console Statistics Operations Manual
Database Administration (Cont.)
Set Database Space The Set Database Space option on the Database Administration menu is used to
reserve the necessary storage for the new database. This must be done prior to
Installing a new database.
Note: The current database space is shown in parenthesis by the Set Database Space
menu option. If a current database is set, the current database must be removed
(using the Remove Database option) BEFORE setting a new database space. See
the Remove Database section later in this chapter.
Step 1: From the Database Administration menu (Figure 9-2), press the ’S’ key
and press Enter. The following prompt will be displayed:
Specify name of desired database space:
Step 2: At this prompt, enter the name of the database space to be used and press
Enter. The screen will show a message confirming the new database
space name. This new database space name will now be shown in
parenthesis following the Set Database Space option on the menu.
Name Database The Name Database option on the Database Administration menu is used to
establish or change the name of the database.
Note: The current database is shown in parenthesis by the Name Database menu op-
tion.
Step 1: From the Database Administration menu (Figure 9-2), press the ’N’ key
and press Enter. The following prompt will be displayed:
Specify name of desired database:
Step 2: At this prompt, enter the name of the database to be used and press Enter.
The screen will show a message confirming the new databa se name. This
new database name will now be shown in parenthesis f ollowing the Name
Database option on the menu.
Note: If a value other that "statsdb" is used for the Database Name, the Database Name
field in the stacfg APM database must also be changed. Then p rocess and install
statcfg.