NDA-30122 Revision 1 Page 35
Attendant Console Statistics Operations Manual REPORT FORMATS
Attendant, Queue, Route, & Station Report Formats (Cont.)
Modifying a Report Format (Cont.) Step 4: With the report format(s) selected, use the Ta b key to select the Modify
option at the bottom of the screen and press Enter. The Modify a Report
Format window (Figure 3-8) will be displayed.
Figure 3-8 Modify A Report Format Window
Step 5: If needed, modify the Interval field selecting between Hour ly, Daily, or
Current and press Enter.
Step 6: If needed, modify the Identifier field by entering a new unique four-
character ID and press Enter.
Step 7: If needed, modify the Statistic 1 field. Select the statistic type from the
pop-up window and press Enter. Then select the associated statistic from
the second pop-up window, and press Enter. Repeat this through the
remaining Statistics fields to modify.
Step 8: When modifications to the report format are complete, use the Tab key
to select the Ok option at the bottom of the window and press Enter to
save the changes. The specific reports screen will again be displayed.
- If more than one r e port format was marked to modify (Step 3), a new
Modify a Report Format screen will now be displayed showing the next
report format selected to modify. Repeat Steps 5-8.
Note: At anytime BEFORE saving the changes (Step 8), the original settings for the se-
lected report format can be restored. Using the Tab key, select the Clear option
at the bottom of the screen and press Enter. The prior settings for the report for-
mat will be displayed on the screen.