NEC VXi manual Around the Back of the System, Back system features

Around the Back of the System

You’ll find system ports for connecting your NEC Versa VXi to optional devices (like a printer or external monitor) on the back of your NEC Versa VXi. The ports are described after the figure.

Back system features

A – PS/2 Port	E – VGA Port
B – AC Power Port	F – Serial Port
C – Parallel Port	G – USB Ports
D – Expansion Port	H – Modem/LAN Port

!PS/2 Port — Use the standard PS/2 port to connect an external PS/2-style mouse, PS/2-style keyboard, or PS/2 style Numeric Keypad to the system. With an optional Y-adapter cable, you can connect up to two of these devices at the same time.

!AC Power Port — Lets you attach the NEC Versa VXi to the AC power source using the AC adapter that comes with your system. Keep the system connected to AC power whenever possible to keep the battery pack and internal CMOS battery charged.

!Parallel Port — Use this port to connect a parallel printer or other parallel device. The parallel port default supports the Enhanced Capabilities Port (ECP) standard. The port also supports bidirectional and output only protocols.

!Expansion Port — Use this port to connect the Port Replicator.

!VGA Port — Use this 15-pin port to attach an external monitor to your NEC Versa VXi.

!Serial Port — Use this port to connect a serial printer or other serial device.

!USB Ports — Each Universal Serial Bus (USB) port allows you to connect up to 127 USB-equipped peripheral devices (for example, printers, monitors, scanners) to your NEC Versa VXi.

1-12 Introducing the NEC Versa