NEC VXi manual Installing the memory module, Removing the memory module

6.Align the notch with the notch in the slot connector and install the module as follows:

!Hold the SO-DIMM at a 60-degree angle and align the SO-DIMM connector with the slot in the system. Push the connector into the slot.

!Press down on the edge of the SO-DIMM until the locking tabs on the sides snap into place, securing the module.

Installing the memory module

7.To remove a SO-DIMM, press the locking tabs away from the sides of the module until the module pops up. Then, remove the SO-DIMM.

Removing the memory module

Using the System Drives and Bays 5-7