NEC VXi manual Installing Easy CD Creator, Installing DirectCD

Installing Easy CD Creator

Easy CD Creator is an application that allows you to create data and audio CDs. Follow these steps to install Easy CD Creator.

1.In Windows 98, double click on My Computer.

In Windows 2000 and Windows NT, insert the NEC CD-RW CD into the CD read/write drive. The Adaptec Master Setup screen appears. If the CD does not load automatically, do the following.

!Double click on My Computer on the Windows desktop.

!Double click on the CD drive. The Adaptec Master Setup screen appears. Go to step 3.

2.In Windows 98, the Choose an Option dialog box appears. Select ‘Run Adaptec CD-R/RW software installation program’ and click OK. The Adaptec Master Setup screen appears.

3.Click Easy CD Creator.

4.The Adaptec Easy CD Creator Setup appears. Click Next.

5.The Software License Agreement appears. Click Yes.

6.The Choose Destination Location dialog box appears. Click Next.

7.Easy CD Creator is installed. When the installation completes, click Finish.

8.A dialog box appears asking if you want to install Adobe Acrobat Reader to access the online help provided by Adobe. Click No if Acrobat Reader in installed. Click Yes to install Acrobat Reader. If you click Yes, Acrobat Reader will be installed after you restart the system. Follow the on-screen prompts to install Acrobat Reader.

9.The Adaptec Master Setup screen appears. Click Exit. Proceed to the next section.

Installing DirectCD

DirectCD lets you write files directly to the CD in the CD read/write drive. Use the following procedure to install DirectCD.

1.Click DirectCD on the Adaptec Master Setup screen appears.

2.The DirectCD Note dialog box appears. Click Yes.

3.The DirectCD Welcome screen appears. Click Next.

4.The Software License Agreement appears. Click Yes.

4-10 Using the Operating System and Utilities