NETGEAR RT314 Abbreviations Used if Filter Type Is IP, Abbreviations Used if Filter Type Is GEN

Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers

Table 10-1.	Abbreviations Used in Menu 21.1 - Filter Rules Summary (continued)
Abbreviation		Description
m		Refers to Action Matched. F means to forward the packet, D means to drop the
		packet, and N means to check the next rule.
n		Refers to Action Not Matched. F means to forward the packet, D means to drop the
		packet, and N means to check the next rule.

For more information about filter rules, refer to “Configuring a Filter Rule ,” on page 10-6.

If the filter type is IP (TCP/IP), the abbreviations listed in Table 10-2are used.

Table 10-2.	Abbreviations Used if Filter Type Is IP
Abbreviation	Description
Pr	Protocol
SA	Source Address
SP	Source Port number
DA	Destination Address

If the filter type is GEN (generic), the abbreviations listed in Table 10-3are used.

Table 10-3.	Abbreviations Used if Filter Type Is GEN
Abbreviation	Description
Off	Offset
Len	Length

To configure a specific filter rule, select the number of the filter rule (1–6) that you want to configure and press [Enter] to display Menu 21.1.1 - TCP/IP Filter Rule (Figure 10-3).

10-4 Configuring Filters