NETGEAR RT311, RT314 manual Internet Access Configuration

Chapter 8 Using the Manager Interface to Configure the Router for Internet Access

This chapter describes how to configure your Model RT311 and RT314 Internet Access Gateway Routers for Internet access using the internal Manager interface. For information about using the Manager interface, refer to Chapter 7, “Using the Manager Interface for Initial Router Configuration.”

Internet Access Configuration

You can configure the router for basic access to your Internet service provider (ISP) using Manager Menu 4, Internet Access Setup. The configuration information required is either supplied directly by your ISP or must be obtained from your preconfigured PC as described in “Obtaining ISP Configuration Information (Windows)” on page 3-8.Additional configuration parameters are available in Menu 11, Remote Node Setup.

To configure your router for Internet access:

1.Enter 4 from the Main Menu to display Menu 4 - Internet Access Setup. Menu 4 - Internet Access Setup opens (Figure 8-1).

Using the Manager Interface to Configure the Router for Internet Access 8-1