
Chapter 4
Initial Configuration of the Router
This chapter describes how to perform the initial configuration of your Model RT311 or RT314 Internet Access Gateway Router using the Setup Wizard, which walks you through the configuration process.
Configuring for Internet Access
In order to use the
To configure for Internet access using your browser:
1.Turn on the router and wait for initialization to complete. Allow at least one minute and verify that the TEST LED is off.
2.Reboot your PC to obtain DHCP configuration from the router.
3.Launch your web browser.
4.In the Address box of your browser, type http://192.168.0.1 and press ENTER.
Initial Configuration of the Router |