Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers
Using the Manager Interface for System Maintenance 9-9
The procedure for receiving or sending the configuration file varies depending on the type of
terminal software used to access the router.

Backing Up and Restoring the Configuration Using FTP

To back up or restore the configuration file over the LAN, you must have an FTP client program.
Windows includes an FTP client program that can be accessed using the Start button and Run
menu. Other FTP client programs are available through many software retailers and shareware
sites.
To back up or restore the configuration:
1. If you are sending a configuration file to the router, first rename it to rom-0.
2. Establish an FTP connection to the LAN IP address of the router.
No login name is necessary. The password is the current Manager password. The factory
default password is 1234.
3. Select binary (not ascii) transfer mode.
4. Use your FTP program to get (back up) or put (restore) the file named rom-0 in the
router.
Software Update
You can update the router software updates either by using the serial cable connection or by using
an FTP program.

Updating Router Software Using a Serial Connection

Your serial communications software must have the ability to transfer data using the XMODEM
Protocol.
Caution: This procedure deletes the existing s oftware before installing the new
software. Do not attempt to use this menu unless you have the new software version.