NETGEAR RT314, RT311 manual After viewing the table, type exit to return to the menus

Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers

4.Press [Enter].

The command interpreter displays the static IP routing table as shown in the example in Figure 8-3.

ras> ip rout stat
Dest	FF Len		Interface	Gateway	Metric	stat Timer		Use
192.168.0.0	00	24	enif0	192.168.0.1	1	041b	0	0
default	00	0	enif1	10.118.18.1	1	001b	0	0
ras>

Figure 8-3. IP Static Routing Table Example

In this example, the first route shown is the local Ethernet subnet connected to the LOCAL interface (enif0). The second route is the default route, through the INTERNET interface (enif1). All traffic from the LAN to a destination outside the LAN will be sent to the default route and will be handled by the ISP.

5.After viewing the table, type “exit” to return to the menus.

To create additional static routes for IP:

1.In the Manager interface, open Menu 12 - IP Static Route Setup.

2.Select an unused number from the menu and press [Enter]. Menu 12.1 - Edit IP Static Route opens as shown in Figure 8-4.

8-6 Using the Manager Interface to Configure the Router for Internet Access