NETGEAR RT314, RT311 manual Using the Manager Interface, Turning on Power to the Router

Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers

Using the Manager Interface

Turning on Power to the Router

When power is first applied to the router, several internal tests are performed by the router. Your Internet line is initialized at this time. During the initialization, the start-up display is transmitted over the serial Manager port, as illustrated in Figure 7-1. Note that this display is only visible from a serial connection, as the router will not accept a Telnet connection until initialization is complete.

Bootbase Version: V1.12 1/27/2000 18:31:01

RAM: Size = 4096 Kbytes

DRAM POST: Testing: 4096K OK

FLASH: intel 8M

RAS Version: V3.20(M.00) 5/26/2000 19:43:28

Press any key to enter debug mode within 3 seconds.

..........................................

Figure 7-1. Start-up Display

7-4 Using the Manager Interface for Initial Router Configuration