NETGEAR RT314, RT311 manual Ethernet Cabling, IP Configuration by Dhcp

Reference Guide for the Model FR314 Cable/DSL Firewall Router

IP Configuration by DHCP

When an IP-based local area network is installed, each PC must be configured with an IP address. If the PCs need to access the Internet, they should also be configured with a gateway address and one or more DNS server addresses. As an alternative to manual configuration, there is a method by which each PC on the network can automatically obtain this configuration information. A device on the network may act as a Dynamic Host Configuration Protocol (DHCP) server. The DHCP server stores a list or pool of IP addresses, along with other information (such as gateway and DNS addresses) that it may assign to the other devices on the network. The FR314 firewall router has the capacity to act as a DHCP server.

The FR314 firewall router also functions as a DHCP client when connecting to the ISP. The router can automatically obtain an IP address, subnet mask, DNS server addresses, and a gateway address if the ISP provides this information by DHCP.

Ethernet Cabling

Although Ethernet networks originally used thick or thin coaxial cable, most installations currently use unshielded twisted pair (UTP) cabling. The UTP cable contains eight conductors, arranged in four twisted pairs, and terminated with an RJ45 type connector. A normal "straight-through" UTP Ethernet cable follows the EIA568B standard wiring and pinout as described in Table B-3.

Table B-3.		UTP Ethernet cable wiring, straight-through
Pin	Wire color		Signal
1	Orange/White		Transmit (Tx) +
2	Orange		Transmit (Tx) -
3	Green/White		Receive (Rx) +
4	Blue
5	Blue/White
6	Green		Receive (Rx) -
7	Brown/White
8	Brown

B-10 Network and Routing Basics