Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers
8.Click on Next to go to the ISP Parameters screen, shown in Figure
Figure 4-4. Browser-based Setup Wizard, second screen
This screen determines whether a login program will be run.
a.If your service provider does not require a login program, leave Encapsulation as Ethernet and proceed to Step 9.
b.If your service provider uses PPP over Ethernet (PPPoE), select Encapsulation as PPPoE, and enter these additional parameters:
•If your connection supports multiple ISPs, enter the Service Name of the one you use. Otherwise leave Service Name blank.
•Enter the PPPoE login user name and password provided by your ISP. These fields are case sensitive.
•If you wish to change the login timeout, enter a new value in seconds.
Proceed to Step 9.
c.European versions only: If your service provider uses Alcatel's ANT (ADSL Network Termination) with PPTP as a login method, select Encapsulation as PPTP, and enter these additional parameters:
•Enter the PPTP login user name and password provided by your ISP. These fields are case sensitive.
•If you wish to change the login timeout, enter a new value in seconds.
Initial Configuration of the Router |
