NETGEAR WG602V4 manual Click Apply to save your changes

NETGEAR 54 Mbps Wireless Access Point WG602v4 Reference Manual

To configure the WG602v4 in wireless repeater mode:

1.Open a web browser and log into the WG602v4 using the addressing scheme you have set up.

Figure 4-5

2.Under Advanced on the main menu, click Wireless Bridging. The Wireless Bridging screen will display showing the default settings for the wireless access point.

3.Select the Repeater with Wireless Client Association radio button to enable Repeater Mode.

4.Enter the MAC address of the remote wireless access point and click Add. The AP’s MAC address and connection information will appear in the Wireless Remote Access Point List.

5.Click Apply to save your changes.

4-8 Advanced Configuration

v1.0, June 2007