NETGEAR 54 Mbps Wireless Access Point WG602v4 Reference Manual
Table A-1. Access Point Default Configuration Settings
Feature | Description | |
|
|
|
Wireless |
| |
|
|
|
| Wireless Communication | Enabled |
|
|
|
| Wireless Network Name (SSID) | NETGEAR |
|
|
|
| Security | Disabled |
|
|
|
| Broadcast SSID | Enabled |
|
|
|
| Transmission Speed | Autoa |
|
|
|
| Country/Region | United States (in North America; otherwise, varies by |
|
| region) |
| RF Channel | 11 until the region is selected |
|
|
|
| Operating Mode | 802.11b/802.11g |
|
|
|
| Data Rate | Best |
| Output Power | Full |
| Access Point Mode | Access Point |
| Wireless Card Access List | All wireless stations allowed |
| MAC Address Filtering | Disabled |
|
|
|
| WMM Support | Disabled |
| Spanning Tree Protocol | Enabled |
a. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.
Technical Specifications
The following table lists the specifications for the WG602v4.
Table A-2. Technical Specifications
Parameter | NETGEAR WG602v4 54 Mbps Wireless Access Point |
|
|
Radio Data Rates | 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps Auto Rate Sensing |
|
|
Frequency | |
|
|
Data Encoding: | Direct Sequence Spread Spectrum (DSSS) for 802.11b and Orthogonal |
| Frequency Division Multiplexing (OFDM) for 802.11g |
|
|
|
|
Default Configuration and Technical Specifications |
