NETGEAR WG602V4 manual Chapter Management

NETGEAR 54 Mbps Wireless Access Point WG602v4 Reference Manual

Configuring Wireless Security	2-13
Wireless Settings Information Form	2-15
Configuring WEP Wireless Security	2-16
Configuring WPA-PSK Wireless Security	2-17
Configuring WPA2-PSK Wireless Security	2-18
Configuring WPA-PSK/WPA2-PSK Wireless Security	2-18
Restricting Wireless Access by MAC Address	2-19
Chapter 3
Management
Viewing General Information	3-1
Viewing a List of Attached Devices	3-2
Upgrading the Wireless Access Point Software	3-3
Rebooting and Resetting Factory Defaults	3-4
Rebooting the Wireless AP	3-5
Restoring Factory Default Settings	3-5
Using the Reset Button to Reboot or Restore Factory Defaults	3-5
Changing the Administrator Password	3-6
Chapter 4
Advanced Configuration
Configuring Access Point Modes	4-1
Configuring a WG602v4 as a Point-to-Point Bridge	4-1
Configuring Wireless Multi-Point Bridging	4-4
Configuring Repeater with Wireless Client Association	4-7
Client Mode Configuration	4-10
Advanced Wireless Settings	4-14
Chapter 5
Troubleshooting
Troubleshooting	5-1
No lights are lit on the access point. ........................................................................5-1
The Ethernet LAN light is not lit	5-1

The Wireless LAN activity light is not lit. ..................................................................5-2

I cannot configure the wireless access point from a browser. .................................5-2

I cannot access the Internet or the LAN with a wireless capable computer. ...........5-2

When I enter a URL or IP address I get a timeout error	5-3
Using the Reset Button to Restore Factory Default Settings	5-3

iv

v1.0, June 2007