23
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
Lens care
Be careful not to hold the camera body when the lens is at tached, as this may
cause damage to the camera (lens mount). Be sure to hol d both the lens and
camera when carrying.
Be careful not to allow the CPU contacts to become dir ty or damaged.
• If the lens mount rubber gasket is damag ed, be sure to visit the nearest Nikon-
authorized service representative for repair.
Clean lens surfaces with a blower brush. To remove dirt and smudges, use a sof t,
clean cotton cloth or lens tissue moistened with ethano l (alcohol) or lens cleaner.
Wipe in a circular motion from the center to outer edge, taking care not to leave
traces or touch other parts of the lens.
• Never use organic solvent such as thinn er or benzene to clean the lens.
• NC filters are available to protec t the front lens element. The lens hood also
helps to protect the front of the lens.
• When storing the lens in its f lexible lens pouch, attach both the front and rear
lens caps.
• When the lens is mounted on a came ra, do not pick up or hold the camera
and lens by the lens hood.
• When the lens will not be used for an e xtended period of time, store it in a
cool, dry place to prevent mold and rust. Be sure to store the l ens away from
direct sunlight or chemicals such as camphor or naphthalene.
• Do not get water on the lens or drop it in water as this w ill cause it to rust and
malfunction.
• Reinforced plastic is used for cer tain parts of the lens. To avoid damage, never
leave the lens in an excessively hot place.
Standard accessories
• 77mm snap-on Front Lens Cap LC-77
• Rear Lens Cap LF-1
• Bayonet Hood HB- 48
• Semi-soft case CL-M2
Optional accessory
77mm screw-on filters
AF-S Teleconverters (TC-14E /TC-17E /TC-20E )