6 - 18 SETUP SEND
Using TX Lock
You must use a password t o switch TX Lock ON and OFF.
Setting Up the TX Lock for the First Time
1
Press Menu/Set, 2, 0, 1.
2
Enter a 4-digit number as a new
password.
3
Press Menu/Set.
The screen prompts you t o re-enter
the password.
4
Re-enter the password an d press Menu/Set.
5
Press or to choose
Set TX Lock.
6
Press Menu/Set. The s creen
prompts you to enter the password.
7
Enter a 4-digit passwo rd, followed by Menu/Set.
This is the same as the security password of the machine
already stored.
The screen displays Accepted for 2 seconds, followed by
TX Lock Mode - TX Lock is now switched ON.
If the password you ente r at Step 7 is incorrect, the scree n
would display Wrong Password. After 2 seconds the display
will then return to normal (displaying the date & time). You must
then switch ON TX Lock again. (See Switching TX Lock ON on
page 6-19.)
1.TX Lock
New Passwd:XXXX
Verify:XXXX
Password:XXXX