Oki 391, 390 manual Top of Form TOF

Top of Form (TOF)

!If you turn the platen knob when the printer is turned on, you will cause the Top of Form to mis-align. Always

turn the printer off before turning the platen knob!

!The factory default setting for the Top of Form (where the printing should begin) is one inch down from the top

of the page.

!Your software may print the first line of print above or below where TOF is set. You may need to adjust the

TOF to meet your software’s needs. Use the procedures in “Using Your Printer, Top of Form, Forms Tear-Off Status (ON or OFF).”

!The first line prints at the red line of the plastic paper shield (1) on the printhead.

1

M

The Top of Form and Forms Tear-Off settings of your printer interact.

How you set the Top of Form depends on the status of the Forms Tear-Off menu setting.

If Forms Tear-Off is activated (set to ON), set the Top of Form using “Using Your Printer, Setting Top of Form, Forms Tear- Off ON (Step A).”

If Forms Tear-Off is NOT activated (set to OFF), set the Top of Form using the “Using Your Printer, Setting Top of Form, Forms Tear-Off OFF (Step B).”

P

User’s Guide: English 23