Font Sample Test
!The Font Sample Test automatically stops after all the available fonts print.
!Wide Carriage Model Microline 391 Turbo
If you are using 8.5 inch paper to run the test, make sure the paper width selection in the printer menu is set to 8.5 inches. Otherwise, printing on the platen may damage the printer. Refer to “Using Yo
The Font Sample Test prints a sample of the fonts standard to the printer.
The top of the printout has the Printer Model, Emulation, Country Code, Interface, and Firmware Revision Level for your printer.
To run the test:
•Turn the printer off, then press and hold the LF key while turning the printer back on.
LF
Micro Feed
Down
GROUP
To exit the test:
• Press SEL.
SEL
SEL
MENU
User’s Guide: English 35
