
9Replace the printhead, making sure that the circuit board at the bottom of the printhead firmly engages the slot (1) in the carriage.
10 Reinstall the printhead clamp and swing it back over to lock the printhead in place.
5
CAUTION |
| |||
ATTENTION |
| HOT | ||
VORSICHT | HEISS | |||
5 0 9 |
| CHAUD | ||
1 0 8 6 | ||||
|
1
!CAUTION! Be sure the printhead is fully inserted before proceeding.
!Important! The clamp must be between the black projection on the printhead and the metal plate on the
carriage, on both sides.
58 Microline 390/391 Turbo