Oki 390, 391 manual Top Feed Single Sheets

7Install the paper separator. Place the wire guide (1) on the pull-up roller assembly (2).

Top Feed (Single Sheets)

Use the single-sheet path for letterhead stationery, memos, and individual envelopes.

!If you have continuous-form paper in the path, press PARK to remove it before loading single sheets.

1Make sure the printer is on and deselected (SEL light off).

2Place the paper lever in the position marked “TOP.”

1

2

8Press FF/LOAD. The paper feeds into the printer.

!The factory default setting for the Top of Form (where the printing should begin) is one inch down from the top

of the page. To change the setting, see “Using Your Printer, Top of Form (TOF).”

3Open the carriage cover. Raise the paper separator to the single-sheet position.

	SEL
	SEL
MENU		LF
EXIT	SHIFT		FF/LOAD
POWER	ALARM	GROUP			TEAR		PRINT	QUALITY
			ITEM		PARK	QUIET
				SET				HSD	UTL
			MENU		PRINT	TOF		NLQ
							CHARACTER		SSD
							10PITCH

1712

20 15 PROP

32 Microline 390/391 Turbo