Menu Settings Table (Continued)
For a complete explanation of each menu item, refer to “Using Your Printer, Menu Mode, Explanations of Menu Items.”
The table below shows the items which may appear in the menu. Settings which are engaged at the factory (defaults) are set in bold italic. Some groups or entries will only appear when a specific emulation is engaged, as noted.
Group | Item | Settings (Defaults are set in bold italic) |
Rear Feed | Line Spacing | 6 LPI, 8 LPI |
| Form | Off, 500 ms, 1 sec, 2 sec |
| Skip Over Perforation | No, Yes |
| Page Width (wide model only) | 13.6", 8" |
| Page Length | 11", |
|
|
|
Bottom Feed | Line Spacing | 6 LPI, 8 LPI |
| Form | Off, 500 ms, 1 sec, 2 sec |
| Skip Over Perforation | No, Yes |
| Page Width (wide model only) | 13.6", 8" |
| Page Length | 11", |
|
|
|
72 Microline 390/391 Turbo
