Installation

Installation Hints

Read the setup and operating instructions in this document carefully. Be sure to save this document for future reference.

Read and follow all warning and instruction labels on the printer itself.

Place your printer on a firm, solid surface. If you put in on something unsteady, it might fall and be damaged. If you place it on a soft surface (such as a rug, sofa, or bed) the vents may be blocked, causing it to overheat.

The printer must be installed near a power outlet which will remain easily accessible.

Be certain that your power source matches the rating listed on the back of the printer. If you are not sure, check with your dealer or with your local power company.

Your printer has a grounded, 3-prong plug as a safety feature. It will only fit into a grounded outlet. If you can not plug it in, chances are that you have an older, non- grounded outlet. Contact an electrician to have it replaced with a grounded outlet. Do not use an adapter to defeat the grounding.

Avoid damaging the power cord. Do not put anything on it or place it where it will be walked on. If the cord becomes damaged or frayed, replace it immediately.

20 Microline 390/391 Turbo

Page 20
Image 20
Oki 390, 391 manual Installation Hints