Olicom 8600 Protocol Filters Menu, More, Port number Security Mode, Protocol Class Assignment

121

More

Displays additional entries in the filter table if the table contains multiple pages.

Port (number) Security Mode

The type of security mode applied to this port.

Protocol Filters Menu

This menu is accessed from the Filters and Port Security menu.

To filter data based on protocol, you can define protocol classes and then assign filtering attributes to these classes on a per port basis. The classes in protocol filtering are based on destination service access point (DSAP) information. In protocol filtering, each incoming frame is assigned to one of the protocol classes based on the DSAP or Ethertype of the frame. If the DSAP is 0xAA (which indicates the Subnetwork Access Protocol [SNAP]), the assignment is based on the Ethertype of the SNAP header. The mapping from DSAP or Ethertype to protocol class is common for all switch ports in a stack.

The Protocol Filters menu provides access to the Protocol Class Assignment screen and the Port Filtering Attributes screen:

Protocol Class Assignment...

Selecting this item will open the Protocol Class Assignment screen.

Port Filtering Attributes...

Selecting this item will open the Port Filtering Attributes screen.

CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641 Switch Configuration