Olicom 8605, 8600 manual Protocol Class Assignment Screen, 122, Ethertype, DSAPs

122

Protocol Class Assignment Screen

The Protocol Class Assignment screen shows the 15 protocol classes that may be defined by the user. Note that Class 0 is the default class and will contain all DSAPs and Ethertypes not assigned to any other class.

You modify a class by highlighting the class and pressing ENTER. You will then be prompted for the field to modify: Name, Ethertype or DSAPs. When all classes have been defined as desired, select Return to save the values and exit the screen.

Class

For the selected port, use the Class field to select a class to modify.

Ethertype

The Ethernet protocol type that you want to filter. You can specify one Ethertype (in its 4-digit hexadecimal format) for each of the classes 1 through 8. You cannot specify an Ethertype for protocol classes 9 through 15.

DSAPs

List of the DSAPs that you want to filter. You can specify up to 16 DSAPs (in their hexadecimal format) separated by spaces.

CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641 Switch Configuration