Olicom manual CrossFire 8600/8605 Token-Ring Switches v .2, P/N

44

➽Warning: Do not work on the system or connect or disconnect cables during periods of lightning activity. Read the installation instructions before you connect the system to its power source.

To turn power off the switch, you must disconnect the power cord; there is no ON/OFF switch. Note that if the switch is connected to an external Redundant Power Supply Unit (RPSU), the power cord must be removed from both units.

•Locate the emergency power-off switch for the room in which you are working. Then, if an electrical accident occurs, you can act quickly to turn off the power.

•Before working on the system, unplug the power cord. To avoid the possibility of electrical shock, unplug the power cord from the outlet before detaching the power cord from the switch.

•

•

•

•

•

Disconnect all power before doing the following:

—Installing or removing a chassis

—Working near power supplies

—Performing a hardware upgrade

Do not work alone if potentially hazardous conditions exist.

Never assume that power is disconnected from a circuit. Always check.

Look carefully for possible hazards in your work area, such as moist floors, ungrounded power extension cables, and missing safety grounds.

If an electrical accident occurs, proceed as follows:

—Use caution; do not become a victim yourself.

—Unplug the power cord(s).

—If possible, send another person to get medical aid. Otherwise, assess the condition of the victim and then call for help.

—Determine if the person needs rescue breathing or external cardiac compressions; then take appropriate action.

CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641 Preparing for Installation