Olicom 8605, 8600 manual Vlan Parameter Configuration for TrBRF Screen, Mtu

Models: 8605 8600

1 250
Download 250 pages 47.96 Kb
Page 108
Image 108

92

VLAN Parameter Configuration for TrBRF Screen

Use the VLAN Parameter Configuration for TrBRF screen to add or change a BRF. Note that the trbrf-defaultcannot be deleted. Also, the trbrf-defaultcannot be assigned new BRFs. The BRF screen is shown below.

The following information is displayed on this screen:

VLAN ID

Numeric ID of the BRF. Possible values are 1 through 1005. Values 1002 through 1005 and 1 are reserved for the default BRFs and CRFs.

VLAN Name

ASCII name associated with the BRF. Up to 32 characters are allowed.

State

Current state of the BRF. Possible values are Operational and Suspended. BRFs in operational state are functional. BRFs in suspended state do not pass packets. The default is operational.

MTU

Maximum Transfer Unit of the BRF (maximum size of the information field in transmitted packets). Possible values are 1,500, 4,472 (default), 8,144, and 17,800. The actual value used depends also on the value configured for the port (the smaller value is used).

CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641

Switch Configuration

Page 108
Image 108
Olicom 8605, 8600 manual Vlan Parameter Configuration for TrBRF Screen, Mtu