Olicom 8605 Reset Screen, 142, Number of Resets Since Diagnostics, Reset Switch With Diagnostics

142

Reset Screen

The Reset screen is accessed from the main menu. The Reset screen, as shown below, displays the reset options available with the switch.

Number of Resets Since Diagnostics

Number of times the switch has been reset since the switch was powered on or ran power-on diagnostics. This is an informational heading; the data cannot be changed.

This number is not reset to 0 when nonvolatile RAM is cleared.

The following four items within the Reset screen are command functions that you can select and initiate by moving the highlight over the item and pressing ENTER.

Reset Switch With Diagnostics

A reset function is initiated with this command. It resets the switch hardware; runs diagnostic tests; clears all counters, including address tables; and restarts the switch. When the switch reboots, administrative parameters from non-volatile memory are used to initialize the operational parameters. This takes approximately 4 to 5 minutes.

Reset Switch Without Diagnostics

This command resets the switch hardware; clears all counters, including address tables; and starts the switch. When the switch reboots, administrative parameters from non-volatile memory are used to initialize the operational parameters. This procedure takes approximately 40 seconds.

CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641 Switch Configuration