Olicom 8605, 8600 manual Control Panels, Front Panel, Connectors and Push-Buttons, Name Description

66

Control Panels

The following tables list and describe the connectors, switches and status LEDs on the switch.

Front Panel

Table 17 and Table 18 list the front panel controls on the switch.

Connectors and Push-Buttons

Name	Description
Ports 1 to 20	CrossFire 8600:
	UTP/STP Token-Ring ports with RJ-45 jacks.
	— Ports 19 and 20 can attach to a MAU/CAU RI/RO port.
	CrossFire 8605:
	Fiber Token-Ring ports using VF-45 connectors.
	— All 20 fiber ports can attach to a MAU/CAU RI/RO port.
	— On CrossFire 8605, UTP/STP connections are only
	available via the CrossFire 8610 Token-Ring UEM.
MANAGEMENT	Console connection with DB-9 connector.
RST	Reset—full system reset of software and hardware.
SYS REQ	System Request—initiates a set of system request menus on
(unlabeled)	the attached console. If depressed for more than 5 seconds,
	the switch will accept download of the main image from the
	serial port via the X-modem protocol.

Table 17. Front Panel Connectors and Push-Buttons

CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641 Installation