139

TFTP

TFTP is not invoked automatically on the switch as it is on certain other network devices, such as a diskless workstation. This is because there should normally be a functional software image in flash memory and, therefore, TFTP is not a standard part of the switch bootup procedure (under normal circumstances). TFTP is intended for use during software upgrades and, once a new image is installed, there should be no need for TFTP until the next software upgrade is installed.

In view of this, the TFTP function in the switch is designed as an explicitly requested operation with operator settable parameters. Note that changes to these parameters may be altered and will be used when starting a download in the display, however, they are not recorded until the display is exited normally.

The TFTP Download/Upload menu is accessed through the main menu. From the main menu select Download/Upload and then select TFTP Download/Upload.

TFTP Download/Upload Screen

The following is an example of the TFTP Download/Upload screen. Note that this screen may contain additional items, depending on the modules installed.

TFTP Server Address

The address of the host serving as the TFTP server.

Download VLAN

The VLAN name through which the download is attempted.

CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641

Switch Configuration

Page 155
Image 155
Olicom 8600, 8605 manual Tftp Download/Upload Screen, 139, Tftp Server Address, Download Vlan