Olicom 8605 manual 189, Enterprise specific traps from OC8600.MIB, Per Port Traps

189

addressee of a protocol message that is not properly authenticated. While implementations of the SNMP must be capable of generating this trap, they must also be capable of suppressing the emission of such traps via an implementation- specific mechanism.

Enterprise specific traps - from OC8600.MIB

oc8600TsStackCfgChange

This trap is generated when there is a change in the stack configuration i.e. when either a new switch is added to the stack or a switch leaves a stack.

oc8600TsNumSwitches indicates the current number of switches which are part of the stack. The management station should update its stack information according to the stack table.

oc8600TsStackStackMatrixChange

This trap is generated when the stack switches over from primary to secondary Matrix or from secondary back to primary Matrix.

oc8600TsStackTempChange

This trap is generated when the temperature in a switch exceeds normal or returns to normal.

oc8600sPowerSupply

This trap is generated when the status of the power supply units changes.

Per Port Traps

oc8600TsPortStrNFwdEntry

This trap is generated when a port automatically enters store and forward mode when the error rate exceeds the threshold.

oc8600TsPortCfgLossTrap

This trap occurs when a port is disabled because it has exceeded its Configuration Loss Threshold within the configured Sampling Period.

oc8600TsBeaconStart

This trap is generated when a port or a station local to a port begins to beacon. It is sent out only when a ring status change indicates that a station is beaconing.

oc8600TsBeaconEnd

This trap is generated when the ring status change indicates that a ring is no longer beaconing. This trap only occurs once when the status actually changes.

oc8600TsDuplicateMACAddr

CrossFire 8600/8605 Token-Ring Switches v. 1.2, P/N: 710001641 Monitoring the Network with SNMP