Troubleshooting
OPERATION GUIDE 6-7
Memory card error. – Memory card is removed while it is
accessed. Insert the memory card. —
An invalid memory card is inserted.
Insert the correct memory card. —
Memory card error. Unable to
continue the job. This job is
canceled. Press [End].
—
Memory is full. – Unable to continue the job as the
memory is used up.
Press [Continue] to print the
scanned pages. The print job
cannot be processed completely.
Press [Cancel] to cancel the job.
—
Paper jam. – If a paper jam occurs, the machine
will stop and the location of the jam
will be indicated on the touch
panel. Leave the machine on and
follow the instruction to remove the
jammed paper.
6-10
Print overrun. – Warning. Low printer memory. The
job was paused. Press [Continue]
to resume the job.
—
Removable memory
error. – This job is canceled. Press [End]. —
Removable memory
was removed. – Press [End]. —
Replace all originals
and press [Continue]. – Remove originals from the
document processor, put them in
the original order, and place them.
Press [Continue] to resume
printing.
Press [Cancel] to cancel the job.
2-27
Replace the waste
toner box. – The waste toner box is full.
Replace the waste toner box. 5-7
Reset all originals in
document processor. Is there any original left in the
document processor? Remove originals from the
document processor. —
Error Message Checkpoints Corrective Actions Reference
Page