Preparation before Use
2-28 OPERATION GUIDE
Originals with correction fluid which is not dried
Irregularly shaped (non-rectangular) originals
Originals with cut-out sections
Crumpled paper
Originals with folds (Straighten the folds before loading. Failure to do
so may cause the originals to jam).
Originals bound with clips or staples (Remove the clips or staples and
straighten curls, wrinkles or creases before loading. Failure to do so
may cause the originals to jam).
How to Load Originals
CAUTION: Before loading originals, be sure that there are no originals left
on the original eject table. Originals left on the original eject table may
cause the new originals to jam.
1Adjust the original width
guides to fit the originals.
2Place the originals. Put the
side to be scanned (or the first
side of two-sided originals)
face-up. Slide the lea din g
edge into the document
processor as far as it will go.
The originals placement
indicator will be lit.
CAUTION: Con firm that the origin al width guides exactly fit the origin als.
If there is a gap, readjust the original width guides. The gap may cause the
originals to jam.