Preparation before Use
OPERATION GUIDE 2-11
6Press [Subnet Mask] and enter address using the numeric keys.
7Press [Default Gateway] and enter address using the numeric keys.
8Check that all addresses are entered correctly, and press [OK].
9Press the Power key, and after confirming that the Power key/indicator
and memory indicator have turned off, turn the main power switch off and
on.
Setting TCP/IP (When Using DHCP)
Follow the steps below to set TCP/IP when DHCP server is available.
1Press the System Menu key.
2Press [System], [Change] of Network and then [Change] of TCP/IP.
3Press [On] of TCP/
IP and [On] of
DHCP.
4Press [OK].
5Press the Power key, and after confirming that the Power key/indicator
and memory indicator have turned off, turn the main power switch off and
on.
Sys tem - TC P/IP
Use TCP/ I P.
On
Off
Cancel OK
Status 10/5/2006 10: 10
DHCP
On
Off IP Add re ss
Subnet Mask
Default
Gateway
0.0.0.0
0.0.0.0
0.0.0.0