Olivetti D-COPIA 400MF, D-COPIA 500MF, D-COPIA 300MF Destination is only one, go to the step, Path

Basic Operation

6	Upon completion of
	all entries, press

[Connection Test] to check the connection.

	Ready to send.	Destination
	Place original.	1
Folder Path Entry
SMB	Host Name
FTP	Path

Login

User Name

Login

Password

				Connection
				Test
	Add to Addr Book	Next Dest.	Cancel	OK
Status	Executing TX job .			10/5/2006 10:10

	NOTE: Connected appears when connection to the destination is
	correctly established. If Cannot connect appears, review the entry.
	If you wish to specify another destination, go to the next step. If the
	destination is only one, go to the step 8.
7	Press [Next Dest.] and repeat the steps 5 to 7 to specify the destination.
	Up to 10 folders (total number of SMB and FTP folders) can be specified.

8

9

10

NOTE: When [Add to Addr Book] is displayed, the entry is registered in the address book.

Press [OK] to register the entry in the destination list.

Check the destination list.

Select a destination and press [Detail/Edit] to check and edit it. Edit it, if necessary, referring to the steps 4 to 6.

Select a destination
		Ready to send.						Destination
and press [Delete] to								1
		Place original.
remove the		Destination			Detail			Book
								Address
destination from the		ABC		SCANDATA		To:
							1/1	E-mail
list.								Addr Entry
								Folder Path
								Entry
	Chain		Detail/Edit		Delete	Recall
		001	002	003	004	005	No.
	AAA	BBB	CCC		DDD	EEE
		006	007	008	009	010	1/10
	FFF	GGG	HHH		III	JJJ
	Destination		Quick Setup		Type of Original/	Color/Image		Advanced
					Transmission			Setup
	Status	Executing TX job .						10/5/2006 10:10

Change the original size, scan resolution, etc. if necessary.

OPERATION GUIDE 3-27