Network Configuration> 13
D
EVICE
S
ETUP
Device Setup allows you to configure the network interface. Type
the root password (default value is the last 6 characters of the
MAC address) to configure. Remember that the root password is
case sensitive. If the MAC address contains any alpha characters,
type them as upper case. Device Setup contains details for the
following selectable tabs:
>General >SNMP
>TCP/IP >POP
>NetWare >SMTP
>NetBEUI >Maintenance
>EtherTalk
Setup Device Setup Configure the network interface.
Setup by
HTTP
Launch the default browser in your
environment to access the selected
printer’s web page.
Setup by
TELNET
Launch TELNET application in your
environment to access the selected
printer’s TELNET port.
Note:The TELNET application is not
included as part of the NIC package.
Install the TELNET package on to
your system. For further information,
see your Windows manual.
Setup Create
NetWare
Queue
Create a NetWare queue.
Delete
NetWare
Object
Delete NetWare object.
Reset Reset the selected network interface card.
Test Print Print self-diagnostic test pages.
IP Address
Setup
Set static IP address of network interface
card manually.
MENU ITEM FUNCTION